USB Web Installer

ESP32 GT7 Dashboard

☕ Support me on Ko-fi

Install the dashboard firmware directly from a compatible desktop browser. No additional software or tools are required.

  1. Connect the classic ESP32 board with a data-capable USB cable.
  2. Close serial monitors and other programs using its serial port.
  3. Select Install firmware, choose the port, and confirm.
  4. Leave the board connected until the installation finishes.

Select the controller fitted to your ESP32-2432S028.

⚠️ ESP32-2432S028 only. Installing replaces the firmware currently on the device.

Classic, GT3, Radar and Retro ESP32 GT7 Dashboard themes
Four switchable themes. The same live GT7 telemetry in every layout.

✅ Installation complete

Next steps:

  1. Disconnect USB.
  2. Reconnect power.
  3. Connect to Wi-Fi: GT7-DASH-SETUP

❤️ Enjoying ESP32 GT7 Dashboard?

If this project helped you build your GT7 dashboard:

⭐ Star this repository

📢 Share it with other GT7 and sim racing enthusiasts.

Every star and share helps the project reach more people.

Select firmware version